Storing in 25 colours (1.0 – 1.2 mm). Very smooth cow-leather (halves), solid-coloured, water-repellent with
high abration. The lower price-variant for the orthopaedic shoe.
Storing in 25 colours (1.0 – 1.2 mm). Very smooth cow-leather (halves), solid-coloured, water-repellent with
high abration. The lower price-variant for the orthopaedic shoe.
Available in 26 colours ( 1,0-1,2mm).
Smooth, clean and water repellent bovine halves. Ideal for orthopedic shoes and sneakers.
Storing in 7 colours (1,2-1,4 mm).
Full grain anilin calf with a special high gloss and a marbled surface. The ideal leather for the modern bespoke shoe.
Storing in 11 colours (1,2-1,4 mm). Soft half-bovine leather with pebble grain.
Especially for sport, work and leisure time shoes.
Storing in 16 colours (0,9-1,1 mm und 1,2-1,4 mm). Smooth calf napa leather,
water-repellent, solid-coloured, with a fine silk-gloss. Perfect for the elegant version of an orthopaedic shoe.
Storing in 16 colours (0,9-1,1 mm). Extra soft calf napa leather,
water-repellent, solid-coloured, with a fine mill grain, particularly
suitable for sensitive feet and diabetics.
Storing in 23 colours (1,0-1,2 mm).
Fine sharpened Velours Split, water-repellent and solid-coloured, suitable for colour-combinations with Ortho-Soft.
Perfect for the hard-wearing shoe.
Storing in 2 colours (1,3-1,5 mm and 1,8-2,0 mm).
Any shoe processed with WR 100 Superproof is:
+ absolutely water-resistant (8 hours-test!)
+ air-tight
+ acid-resistant
+ pleasantly breathable
+ the leather is softly and specially comfortable
+ the shoe remains gently and softly for a life-long time
+ the shoe dries fast
+ also at a long water abandonment the shoe remains soft and comfortable
Therefore WR 100 Superproof is the ideal leather for orthopaedic (worker) shoes.
Storing in 4 colours (1,8-2,0 mm).
Chrome-tanned calfskin, in barrols greased. Suitable for the sporting winter shoe and the
comfortable walking shoe.
Storing in black, wine-red, dark brown (2,2 – 2,4 mm).
Chrome-tanned calfskin, water-repellent.
Perfect for the hard-wearing shoe with metal-hood.
Storing in black (1,6-1,8 mm).
Cow halves corrected with a shiny surface. Is used for the
hard-wearing men’s shoe as well as for an easier worker shoe.
Produced from the tannery Horween from Chicago.
Storing in 5 colours (1,6-1,8mm).
Embossed cattle halves, particularly suitable for smart casual, hand-made shoes.
The leather is combined tanned and aniline finished.
Storing in 9 colours (1,1-1,3 mm).
Imprinting like Scotch-Grain, but in skin halves with silky shine. Particularly
suitable for smart casual, hand-made shoes.
Storing in 10 colours (0,9-1,1 mm).
Braided, shining Calfskin available in 60 cm of breadth.
Ideal for combinations for example with Box Calf. An optimal leather or for the summer shoe completely out of braided leather.
Storing in colour “nature” (2,3-2,5 mm).
Finished from the reverse side , been greasy into train oil and tanned vegetably. For
Climbing boots, endeavour shoes and suitable for the agricultural area.
Storing in 10 colours (1,3-1,5 mm).
Full scarred Anilincalf with a special high gloss. The most elegant leather, that you can offer your demanding customers.
Storing in 10 colours (0,9-1,1 mm).
Braided, shining Calfskin available in 60 cm of breadth.
Ideal for combinations for example with Box Calf. An optimal leather or for the summer shoe completely out of braided leather.
Tanned, not finished boxcalf, ready for coloration. Storing 1,2-1,4 mm strengths.
Available in 8 colours. The special treat for the elegant hand-made shoe.
Storing in 9 colours (1,1-1,3 mm).
Imprinting like Scotch-Grain, but in skin halves with silky shine. Particularly
suitable for smart casual, hand-made shoes.
Produced from the tannery Horween from Chicago.
Storing in 5 colours (1,6-1,8mm).
Embossed cattle halves, particularly suitable for smart casual, hand-made shoes.
The leather is combined tanned and aniline finished.
Storing in 4 colours (1,8-2,0 mm).
Chrome-tanned calfskin, in barrols greased. Suitable for the sporting winter shoe and the
comfortable walking shoe.
Storing in black, wine-red, dark brown (2,2 – 2,4 mm).
Chrome-tanned calfskin, water-repellent.
Perfect for the hard-wearing shoe with metal-hood.
Storing in 2 colours (1,3-1,5 mm and 1,8-2,0 mm).
Any shoe processed with WR 100 Superproof is:
+ absolutely water-resistant (8 hours-test!)
+ air-tight
+ acid-resistant
+ pleasantly breathable
+ the leather is softly and specially comfortable
+ the shoe remains gently and softly for a life-long time
+ the shoe dries fast
+ also at a long water abandonment the shoe remains soft and comfortable
Therefore WR 100 Superproof is the ideal leather for golf- and outdoor-shoes.
Storing in 7 colours (1,4 – 1,6mm).
From the reverse side finished hunting calf.
Particularly suitable for the elegant hand-made shoe.
Storing in black (1,6-1,8 mm).
Cow halves corrected with a shiny surface. Is used for the
hard-wearing men’s shoe as well as for an easier worker shoe.
Storing in colour “nature” (2,3-2,5 mm).
Finished from the reverse side , been greasy into train oil and tanned vegetably.
For Climbing boots, endeavour shoes and suitable for the agricultural area.
Storing 0,7-0,9 mm, 1,0-1,2 mm and 1,2-1,4 mm strengths.
Very soft chrome-tanned lining leather, particularly suitable for sensitive feet.
Storing 0,8 – 0,9 mm and 1,2 – 1,4 mm strengths.
Chrome-tanned lining leather with a little more solid handle.
Storing 0,8-0,9 mm strengths.
Chrome-tanned, not through-perforated calf lining leather, special for footbeds and insoles.
Storing 0.7-0.8mm strength.
Combined-tanned, solid and very smooth surface with a very light silky shine.
Storing 0.7-0.8mm strength.
Combined-tanned, perforated (not through perforated), solid and very smooth surface with a very light silky shine. Special for footbeds and insoles.
Storing 1,0-1,2 mm strength.
Combined-tanned cow lining leather, particularly suitable for orthopaedics, because it is very
sweat- absorptive and breathable and it is always drying out into the original
soft condition.
Storing 1,0-1,2 mm strength.
Combined-tanned cow lining leather, because it is very
sweat- absorptive and breathable and it is always drying out into the original
soft condition.
Storing 0,6 – 0,7 mm strength.
Chrome-tanned, very soft, lightly coloured. Particulary suitable for fine ladies’ shoes.
Storing in the colour beige, very smooth on the skin, close-cropped.
According to the traditional classic method of the pit tanning with only vegetable
tanning agents and a tanning time of over 18 months, in Germany’s oldest tannery since 1645 at the company Martin sole leather has been produced.
The connection exclusively sorted first-class grey-cloth from the
best and most expensive provenances of Europe with this natural one
Refining process makes the production of those high-quality natural products possible.
To be able to satisfy the high requirement of the company Martin,
will be the main challange for the company now in the tenth generation represent!
+ specifically light weight
+ extreme high breathability
+ strength in all skin parts connected with flexibility
+ extreme good strip waste by a smooth fibre cut
+ long durability and carrying duration
+ of course elegant grain picture
Rendenbach
Old tanner necks for insoles and caps.
1,5-2,0 mm/2,0-2,5 mm/2,5-3,0 mm/3,0-3,5 mm/3,5-4,0 mm/4,0-5,0 mm
Tannery Martin
Old-tanned Croupon in a firm execution. 2,0-2,5 mm/ 2,5-3,0 mm/
3,0-3,5 mm/3,5-4,0 mm/4,0-4,5 mm/4,5-5,0 mm/5,0-5,5 mm/5,5-6,0 mm
Kolde
Necks for insoles and caps:
1,5-2,0 mm/2,0-2,5 mm/2,5-3,0 mm/3,0-3,5 mm
Kolde
Croupon for the quality-conscious repair.
2,5-3,0 mm/3,0-3,5 mm/3,5-4,0 mm/4,0-4,5 mm/4,5-5,0 mm/5,0-5,5 mm/5,5-6,0 mm
Storing in 3,0-4,0 mm, 4,0-5,0 mm and 5,0-6,0 mm.
Thermoplastically cap material.
Thermoplastically deformable plastic bracing.
The polish has to be applied simply by hand. It is available in black and nature
and awards the leather uppers a silky brilliance.
Insoles cover material.
For the exact measure of a footprint.
Leather frame in different colours and kinds, sample on inquiry.
Vegetably-tanned cow leather, storing in colours ligthly tinted and nature ,
1,5-1,7 mm, 1,7-1,9 mm and 2,0-2,2 mm strenghts.
Special for the solid insole producing.
Vegetably-tanned calf leather, more solid leather, very sweat-resistant.
The higher qualaty insole variation.
Chrome-tanned calfskin, which is characterized by his smoothy grip.
Suitable for very sensible feet for insoles.
Chrome-tanned, not through-perforated and smooth calfskin,
for the sporty-elegant model insole.
Chrome-free tanned sheepskin, does not irritate the skin, characterized by its extremly
stretchability, suitable for linings for prostheses.
Train- oil tanned Roe Deer leather, especially non-irritating to the skin,
very hard-wearing, suitable for lining of belts, prostheses and corsages.
Train-oil-tanned Deer leather, especially non-irritating to the skin,
very hard-wearing, suitable for lining of belts, prostheses and corsages.
Train-oil tanned sheep leather, especially non-irritating to the skin, suitable
for lighter linings.
Extremely smooth leather in skin colour, particularly suitable for the covering
of hand and foot prostheses.
Lightly tinted or skin colour, very stretchable calfskin
0,7-0,9 mm strength, suitable for covering and lining of prostheses.
Lightly tinted, very stretchabel cowhide 1,3-1,5 mm strong,
particularly suitable for the soft inlining of prostheses.
Combined-tanned pig split for the cover of the back side of insoles.
Chrome-tanned calf split for the cover of the back side of insoles.
Coloured fine Velours leather, storing in a lot of colours, used for the covering of child
safety seats, buggys, wheelchairs and so on….
Very soft leather, storing in a lot of colours, used for the covering of child safety seats,
buggys, wheelchairs and so on….
Vegetably-tanned cow necks. Not tanned trough. Does not irritate the skin and is sweat-resistant , storing in the strengths 1.5 mm,
2.0 mm, 2.5 mm, 3.0 mm and 3.5 mm.
Chrome-tanned belt leather in the strengths 2.5 mm and 3.0 mm.
Storing 0,6-0,8 mm strength, suitable for the covering of prostheses.
Insoles cover material. Insoles cover material.
For the exact measure of a footprint.For the exact measure of a footprint.
We can offer you as follows:
+ big colour selection with a smooth or grained surface
+ strengths of 1,1-1,3 mm
+ minimum purchasing quantity: half a skin
+ price: EUR 40,- per sqm
On inquiry we like to send you quality- and colour- patterns.
We can offer you as follows:
+ goat velours, pig velours
+ lamb napa leather, cattle napa leather
+ cattle nubuck
+ velours lamb, napa lamb
+ cattle leather for motorcycle clothing
+ roe-deer and deer velours
+ and various lining leathers
Storing in a lot of colours and different qualities.
Strengths: 0,4-1,1 mm
Different surface options
Minimum purchasing quantity: one piece for all kind of leather except for cattle.
cattle leather: half a piece
On inquiry we like to send you quality- and colour- patterns.
We can offer you as follows:
+ big colour- and quality- selection
+ strengths of 1,1-1,5 mm
+ several surface options
+ minimum purchasing quantity: half a skin
On inquiry we like to send you quality- and colour- patterns.
Every product covered in leather is unique in its kind.
The natural characteristics of furniture leather and the pleasant touch lend themselves perfectly to armchairs, couches and chairs, adding a touch of elegance and class to the furniture.
Daily care of the leather is not difficult and needs only a bit of attention. All the leathers have already been treated for dust resistance.
Advice for cleaning and maintenance
Thermoplastically deformable insoles material.
Storing in several forms and sizes, suitable for the rapid shoe repairing, stamped
out of “Kolde”- Croupon.
Low-priced variation of individual skins for reparations, storing in many colours
Storing a big assortment of several kinds of insole- and heel- leathers.